Combining two functions into the one OPERATOR SAFETY System and adding SMS alarm plus GPS position
- Active Dual-Axis Slope Meter
- Cabin Pressurisation (and temperature)
- Remote notification of alarm plus GPS position
SIMARINE’s Active Dual-Axis Slope Meter provides highly visible and configurable pitch and roll measurement and display to operators of industrial machinery.
Both pitch and roll can simultaneously be displayed and can optionally be made to signal in the event of an alarm or warning condition.
The integrated touch controls allows for customisation of the display; in application calibration; warning and alarm setup; minimum and maximum tilt display and sensor customisation.
Cabin pressurisation monitor shows on the colour display the cabin pressure in Pascals.
The integrated touch controls allows for customisation of the display; in application calibration; warning and alarm setup; minimum and maximum pressure conditions for alarm customisation.
Both systems contained in:
Equipped with a 3.5" LCD TFT screen, high-resolution IPS technology with high brightness, optimal color reproduction, wide viewing angles and a virtually indestructible Gorilla glass with anti-reflection coating, the PICO is suitable for both indoor and outdoor installation. Thanks to special capacitive CapSense® touch buttons, you can easily operate your PICO even with wet fingers.
An optional industrial adjustable mount allows for optimum positioning for the operator.
Integrated alarm and warning relays provide normally open, normally closed and common outputs. Both warnings and alarms can be configured to be normally-on or normally-off.
Alarms and warnings can be configured and set for a particular machine.
All settings can be saved to a smartphone.
Display: LCD TFT 3,5” High resolution IPS, Gorilla Glass, anti-reflective coating
Human interface: 4 Touch buttons, water resistant
Enclosure: CNC-milled anodized aluminum, water- and dustproof
Dimensions: HxWxD 98 x 83 x 10 mm
An optional fully adjustable RAM 1" ball mount can be screw mounted to the vehicle, or suction mounts are available.
• High visibility colour display
• Pitch & roll readouts
• Clear full colour graphics display
• Warning and alarm outputs
• Voltage range from 9-36V
• Reverse polarity protected
Remote Alarm Notification
1 x PICO One Display
1 x ST107 Input device with alarm NO/NC output
1 x Dual Axis Inclinometer with IP67 Cable
1 x Cabin Pressure sensor
1 x Cabin Temperature Sensor
1 x SEMCO Alarm Notification with 3G plus GPS (can be upgraded to 4G; can have GPS deleted)
All 12V (can be optional 24V)