Combining two functions into the one OPERATOR Air and Cabin Quality Monitor
- Cabin Air Quality
- Cabin Pressurisation and Temperature
Cabin Air Quality measures CO2 and DUST levels and shows both on the colour display in the cabin.
CO2 is measured in PPM with specified Ranges.
DUST particles are measured in PM1. PM2.5 or PM10 ranges.
The integrated touch controls allows for customisation of the display; in application calibration; warning and alarm setup; minimum and maximum conditions for alarm customisation.
The integrated touch controls allows for customisation of the display; in application calibration; warning and alarm setup; minimum and maximum tilt display and sensor customisation.
Cabin pressurisation monitor shows on the colour display the cabin pressure in Pascals.
The integrated touch controls allows for customisation of the display; in application calibration; warning and alarm setup; minimum and maximum pressure conditions for alarm customisation.
Cabin Temperature is measured using stainless water proof sensor.
Both systems contained in:
Equipped with a 3.5" LCD TFT screen, high-resolution IPS technology with high brightness, optimal color reproduction, wide viewing angles and a virtually indestructible Gorilla glass with anti-reflection coating, the PICO is suitable for both indoor and outdoor installation. Thanks to special capacitive CapSense® touch buttons, you can easily operate your PICO even with wet fingers.
An optional industrial adjustable mount allows for optimum positioning for the operator.
Integrated alarm and warning relays provide normally open, normally closed and common outputs. Both warnings and alarms can be configured to be normally-on or normally-off.
Alarms and warnings can be configured and set for a particular machine.
All settings can be saved to a smartphone.
Display: LCD TFT 3,5” High resolution IPS, Gorilla Glass, anti-reflective coating
Human interface: 4 Touch buttons, water resistant
Enclosure: CNC-milled anodized aluminum, water- and dustproof
Dimensions: HxWxD 98 x 83 x 10 mm
An optional fully adjustable RAM 1" ball mount can be screw mounted to the vehicle, or suction mounts are available.
• High visibility colour display
• Pitch & roll readouts
• Clear full colour graphics display
• Warning and alarm outputs
• Voltage range from 9-36V
• Reverse polarity protected
1 x PICO One Display
1 x ST107 Input device with alarm NO/NC output
1 x Dust Sensor SCD01 - Specify PM1, PM2.5 or PM10
1 x CO2 Sensor SCC01 - Specify 2,000, 5000, 10,000 ppm range
1 x Cabin Pressure sensor
1 x Cabin Temperature Sensor
|Unit Of Measure||each|
Others Also Bought
Remote Generator Monitor Plus GPS Alarm
More From This Category
Hot Water Tank System 8L 1,000W 48V
Sound Level Meter for Simarine