Features:

• NO FUSES NEEDED, digital MOSFET control
• Installs IN THE ENGINE BAY to suit dual cabs without canopies and 4WD wagons
• Fully programmable, digital control system
• 8 circuits rated at 30 amps at around 12.5 VDC per circuit
• Easily attach accessories
• 2 controller ports for Ethernet cables
• Low voltage cutoff battery protection
• 50amp auto-resetting circuit breaker
• Operates on 12VDC or 24VDC
• 8-position input terminal block
• On-demand wireless software updates/upgrades
• Mobile app control via bluetooth

Each switch can be programmed for:

• Toggle on/off
• Dimming (very important)
• Momentary
• Switch Linking – Master switch turns all off

Touchscreen Control Panel Benefits:

• Reduced installation time and labour allowing for mounting and connection of eight switches at one time versus individually.
• Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.
• Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.
• Increase in switch lifecycle over traditional electromechanical switches.

Touchscreen Control Module Features:

• Voltage feedback (vehicles battery/alternator voltage)
• Amperage meter for each switch gives you the status of how much current each accessory is drawing
• Customization: legends (3 lines of text)
• Automatic backlighting off after 30 minutes of being inactivity
• Automatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)
• One touch off function
• One second hold on off button shuts all circuits down
• Automatic system shut down when the touchscreen is unplugged
• Backlight dimming
• Multiple Control Module (One touchscreen can control up to 32 circuits)
• Bluetooth for use in programming the touchscreen. (Bluetooth range will depend on location of screen)

Power and Control all of your accessories: from an LED light of 10W to a LED Light bar of 400W

This system is designed to save hours of wiring and installation time when you need to install powered accessories. With more options than you can imagine, this Touchscreen 8-circuit control system is the perfect solution for all of your aftermarket electrical devices. This kit includes 8 circuits rated at 30 amps (at around 12.5DCV) per circuit, allowing you to configure light bars, fridges, water pumps.

Because it is digital, this unit features great protection against overheating, shorting, reverse polarity, and device load surge to provide consistent performance in any situation. Better yet, if you have more than 8 accessories that need to be controlled at the same time, you can chain up to 4 units together controlled by one touch screen. You can even add a second Touch Screen.

The Touch Screen is made from black mat billet machines alloy. It 95mm W x 70mm H x 15mm deep.

The control module is 150mm x 110mm. It uses premium materials for consistent performance and long-lasting functionality. The durable construction of this unit is paired with a powder-coated steel base with built in hardware to handle off-road conditions. A silicone gasket for is included for a high IP rating to ensure dust and moisture will remain out.

Included Hardware:

• Powder coated steel base w/ built in hardware
• Silicone gasket for weatherproofing
• Simple thumb screw fastening aluminium lid
• Robust insulated base and cover