The 80‐600‐0029‐00 interface unit converts the point detection of the insertion stick or plug type tank senders to the 0‐5VDC range used by digital systems.
This output can also be used for 0‐5V analogue inputs and for CZone digital switching systems.
No calibration of the DCSM should be required,
One interface will accomodate 3 existing tanks as shown on the drawing.
Please wire as shown.
Input Voltage: 11‐32 VDC
Power Consumption: 9mA @ 12V (10mA@24V)
Output Voltage: 0V (Empty) to 5V (Full)
Measurement Frequency: Sender is polled every 2 minutes, value is output for following 2 minutes.
Each in Package Height 100mm
Each in Package Width 120mm
Each in Package Length/Depth 20mm
Each in Package Weight 130gms
|Unit Of Measure||each|