This sensor is suitable for any type of Fuel as well as water.
IT is CE Approved.
STLPO01 Pressure Sensor uses a high quality piezo-resistive pressure sensor (or flush ceramic sensor).
It is a differential pressure sensor with the opposing air pressure sensed through a tube that is encased with the wiring. This lifts the natural air pressure measurement to the termination point.
This is a 304 Stainless Steel housing and a 316 Stainless Steel internal sensor which is suitable for:
- Diesel Tank
- Petrol Tank
- Food grade fresh water tank.
- Waster Water tank
- Black Water tank.
It measures a range up to 1,000mm deep (or high) water tank. The Tank can be any volume and ANY shape.
For diesel Fuel the standard range is 1,000/0.85 (for density) = 1170mm high.
Higher tanks are a special order.
Fit this sensor on the outside of the tank where the outlet fitting is at a tee piece OR a drain bung.
EASY TO RETROFIT ANY TANK.
It is a voltage output and is better than 1.5% accuracy.
It has an isolated stainless steel diaphragm as signal sensing element.
This is a quality assembly:
- Automatic testing, laser trimming compensated zero
- Special sensitivity in wider temperature range
- Amplifier circuit is in stainless steel housing,
- Transforming sensor signal into standard output signal.
This sensor, fitted externally, is waterproof and can be submerged through creek crossings.
(STLPO01)
Pressure range |
0-1,000mm Water |
Measuring medium |
Fresh Water |
Signal output |
0-5V |
Power supply |
12V DC |
Overload |
150%.F.S |
Burst pressure |
200%F.S |
Accuracy (Linearity hysteresis repeatability) |
1.5-2%.F.S |
Stability |
0.2%F.S ± 0.05% |
Working Temperature |
-30°C~80°C |
Storage temperature |
-40°C~85°C |
Zero temperature drift |
≤ 0.02%.F.S/°C/year |
Net Weight |
0.1kg |
Housing material |
316 Stainless Steel |
Diaphragm material |
Piezo-resistive Flush Ceramic |
Insulate resistance |
>100MΩ @50V |
Response time |
≤10ms |
Electronic Wire |
3 Wires |
Electronic connection |
Directly sealed cable IP67 |
Pressure connect port |
G1/4” NPT male |
Cable specs |
2m PE cable |
Certificate approving |
CE Certificate |
Water Proof |
IP65 |
Blue & Green |
Signal Output + |
White/Yellow |
Signal Output - |
Yellow |
Ground Wire |
SKU | STLPO01 |
Brand | Safiery |
Shipping Weight | 0.3000kg |
Shipping Width | 0.200m |
Shipping Height | 0.150m |
Shipping Length | 0.200m |
Shipping Cubic | 0.006000000m3 |
Unit Of Measure | each |