Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication.

You can connect digital sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller.

It can also control devices by opening/closing output contacts independently of the inputs.

 

  • Compatible with Secure Wireless Mesh hub.
  • Supports Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
  • Works as a signal repeater.
  • Allows for connecting sensors:
    • 6 DS18B20 sensors,
    • 1 DHT sensor,
    • 2 2-wire analog sensor,
    • 2 3-wire analog sensor,
    • 2 digital input (binary) sensors.
  • Built-in temperature sensor.

 

(SWM12240201)

Technical data

Power supply 12/24V DC ±10%
Inputs 2 Analog 0-10V or 2 digital inputs
1 serial 1-wire input
Outputs 2 potential-free outputs
Supported digital sensors 6 DS18B20 or 1 DHT22
Maximum current on outputs 150mA
Maximum voltage on outputs 30V DC / 20V AC ±5%
Built-in temperature sensor measurement range -55°C–126°C
Operating temperature 0–40°C 
Radio protocol Z-Wave (500 series chip)
Radio frequency 921.4 ANZ;
Radio ransmit power max. 7 dBm (EIRP)
Range up to 50m outdoors
up to 40m indoors
Dimensions (Length x Width x Height) 29 x 18 x 13 mm
Compliance with EU directives RoHS 2011/65/EU
RED 2014/53/EU

 

 

SKU SWM12240201
Brand Safiery

More From This Category