Secure Wireless Mesh wall switch and controller package controls up to 4 devices or scenes with touch sensitive buttons that can issue On/Off/Dim/Brighten commands. It has built-in LED light display. Controller has inputs for interlocks of manual switches
Notify me when back in stock
This package comprises:
- 4 segment switch with 8 functions, wall mounted and portable.
- 4 channel output controller with plug connected fitting.
Suitable to switch wirelessly up to 4 LED Lights:
LED round or focussed lights.
There is a different module for powered devices and for motor control.
This package will operate without the need for a control hub nor the internet.
It is a standalone package.
Secure Mesh Network.
- Both capable of receiving wireless firmware updates* so that they are always up to date.
- Distributed intelligence mesh-networking technology. Enables the devices themselves to create a network with secure communications between each other.
- Provides reliable coverage because these devices are also a wireless repeater. Makes these devices virtually unhackable.
- Network security completely eliminates network vulnerability.
- Attacks such as man-in-the-middle and brute force are rendered futile by way of PIN codes and an industry-standard secure key exchange.
Superior Power Management
- Low operating Wi-fi frequency in the 900Mhz band reduces power consumption considerably.
- Energy management allows battery-driven devices to operate for years before needing battery replacement.
- These devices not only operate in power-save mode, they have a special extremely low sleep current taking little power.
Certified Secure Band Dedicated Operating frequency by Australian Govt.
- These devices operate in the secure 900 MHz band as approved by Australian Govt. They do NOT operate in the overcrowded 2.4 GHz networks occcupied by Wi-Fi, Bluetooth, other common technologies.
Subtle Clean Looking Switch Device.
This Secure Wireless Mesh wall switch takes control of up to 4 devices or scenes with touch sensitive buttons that can issue On/Off/Dim/Brighten commands. It has built-in LED light display.
Cutting-edge performance and security is crafted into the most advanced RV battery-powered wall switch
Magnetic wall retainer with anti-vibration holding indents
Control by just tapping.
Each button is touch sensitive,
Two functions per device: on/off.
Capable of communicating over 50 metres.
In built fine-tuned antenna
- Not just portable, but perfectly balanced.
- The minimalist design measures just 7.7cm wide and a slender 1.9cm deep.
- As you touch the glass front, you will know the switch is active.
- The haptic engine confirms your every action via a click under your finger.
- Suitable for 3 months use before charging as 30 presses a day.
- Battery powered but without the need to ever change a battery.
- Powered by a rechargeable lithium battery designed for smartphones.
- It recharges just like a smartphone too via the provided micro USB cable.
- Controls 4 LEDs and/or low powered Halogen Lights with terminals mounted on DIN rail style PCB in enclosure
- 4 Inputs for interlocks or manual switch integration.
- Intelligent Controller clips into board and secures on PCB PINS.
- Rated output power: combined 12Amps at 12VDC (sum of all connected outputs)
- Max load (e.g. Halogen lamps) at 12V - 144W combined.
- Power consumption: < 0.025A
- Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside
|Unit Of Measure||each|