SCQ50T QUADRO 200A SHUNT, Volt and Resistance MODULE

4x Current 50A 3x Voltage, 4x Resistive (Tanks/Temp)

Sold Out - Backorder Available

SCQ50T is a highly verstaile and innovative combination current measurement, tank interface and voltage module. Its highly innovative shunt module with four inputs for monitoring individual consumer and generator continuous currents up to 50A (70A peak).

SCQ50T is an innovative combination of the SCQ50 shunt module PLUS the T107 Voltage and Resistance input Module with:

  • Four current inputs for monitoring individual consumer and generator continuous currents up to 50A (70A peak) per input
  • Can handle 12V or 24V systems, (same voltage used per device)
  • Innovative protected architecture allows wiring in either negative (low) or positive (high) side. (same system used per device)
  • Very convenient for monitoring smaller consumers like refrigerator or generators like solar, wind, hydro or shore power.
  • Current channels can be combined for higher amperage, meaning 2 x 50A channels can be used for measuring up to 50A.
  • Up to five modules can be connected simultaneously to monitor up to 20 current channels with PICO Battery Monitor.
  • Assignable NO or NC output relay.

Plus it is equipped with:

  • four resistance inputs for resistance-type tank level or temperature sensors and 
  • three voltage inputs for voltage-type tanks sensors and battery voltages allows wide connection possibilities.
  • assignable relay output NO or NC.

It receives its power to operate via the twisted pair communication cable from the splitter power block.

It is a versatile module for monitoring:

  • Tanks of all descriptions
  • Temperature sensors
  • Battery voltage
  • Inclinometer inputs (x and Y need an input each)
  • AC current sense
  • Irradiation sensor for solar performance


Technical specifications

Voltage range 6 – 35 V
Temperature range -20 – +70 °C
Power consumption at 12V  
Operating 3,5 mA
Current measuring channels 4
Current measuring range  
Per channel 0,01 – 50 A
Accuracy ± 0,6 %
Resolution 0,01 A
Sampling rate 100 ms
Maximal current  
Continuous 50 A
Peak current (<1 min) 70 A
Peak current (<5 sec) 100 A
Voltage drop at 25 A 35 mV
Maximal voltage on connections 35 V
Voltage inputs  
Range 0 – 35 V
Resolution 1 mV
Accuracy ± 0,2 %
Sampling rate 100 ms
Resistance inputs  
Range 0 ohm – 65 kohm
Accuracy ± 3,0%
Number of connections Total number of 7 voltage and resistance inputs + 4 x 50A current inputs
Tank level sensors 7 (both Voltage and Resistance). If resistance used for temperature then only 3 Tank Sensors
Temperature sensors 4 (resistance only)
SKU S008
Brand Simarine
Shipping Weight 0.5500kg
Shipping Width 0.190m
Shipping Height 0.050m
Shipping Length 0.240m
Shipping Cubic 0.002280000m3
Unit Of Measure each

You May Also Like