SCQ50 4 x 50A Shunts

SCQ50 is an innovative shunt module :

Four current inputs for monitoring individual consumer and generator continuous currents up to 50A (70A peak) per input
Can handle 12V or 24V systems, (same voltage used per device)
Innovative protected architecture allows wiring in either negative (low) or positive (high) side. (same system used per device)
Very convenient for monitoring smaller consumers like refrigerator or generators like solar, wind, hydro or shore power.
Current channels can be combined for higher amperage, meaning 2 x 50A channels can be used for measuring up to 50A.
Up to five modules can be connected simultaneously to monitor up to 20 current channels with PICO Battery Monitor.
Assignable NO or NC output relay.

It receives its power to operate via the twisted pair communication cable from the splitter power block.

(S008)

Technical specifications

Operating
Voltage range	6 – 35 V
Temperature range	-20 – +70 °C
Power consumption at 12V
Operating	3,5 mA
Current measuring channels	4
Current measuring range
Per channel	0,01 – 50 A
Accuracy	± 0,6 %
Resolution	0,01 A
Sampling rate	100 ms
Maximal current
Continuous	50 A
Peak current (<1 min)	70 A
Peak current (<5 sec)	100 A
Voltage drop at 25 A	35 mV
Maximal voltage on connections	35 V
Voltage inputs
Range	0 – 35 V
Resolution	1 mV
Accuracy	± 0,2 %
Sampling rate	100 ms
Resistance inputs
Range	0 ohm – 65 kohm
Accuracy	± 3,0%
Number of connections	4 x 50A current inputs
Tank level sensors	None
Temperature sensors	None