Safiery are active with 100% Solar EV Charging:

"Travel and Live in a World,
without Consuming the Earth"

Most people with existing solar are selling their excess solar power for a pittance. Electric utilities plan to pay ZERO in the future. If you have an EV now, or plan to have one, Safiery have a solution for you:

1) Install an upgraded hybrid Inverter/Charger to your existing solar.

2) Install a Safiery Lithium system, CEC Accredited with 10 yr warranty.

3) Safiery configure the system for 3 Phase, EVEN IF YOU ONLY HAVE SINGLE PHASE COMING INTO THE HOUSE.

4) Safiery install a Victron 3 Phase EV charging station.

Plug in your EV into the Type 2 Socket and let the system do the rest.

The system will charge the lithium battery bank by day and use excesss solar to charge the EV either before the battery is fully charged or after it is charged. Your choice of strategy.

Specification:

AN EXISTING SOLAR SYSTEM OF 12-16KWP IS DESIREABLE.

Typical 4 Bedroom Home Profile with Swimming pool & Electric Hot Water
Solar Input	Max Energy/ Day Summer	House Consumption During Day	EV Charging per day for 400km/week	Balance for Battery Storage	Used at peak time at night
13.3kWp	65kWh	40kWh	12kWh	13kWh	13kWh

Technical Data	GW10KL-ET
Battery Type	Li-Ion
Nominal Battery Voltage (V)	500
Battery Voltage Range (V)	180~600
Max. Continuous Charging Current (A)	25
Max. Continuous Discharging Current (A)	25
Max. Charge Power (W)	10,000
Max. Discharge Power (W)	10,000
Max. Solar Input Power (W)	13,300
Max. Solar Input Voltage (V)*1	1000
Solar MPPT Operating Voltage Range (V)*2	200~850
Solar MPPT Voltage Range at Nominal Power (V)*3	320~850
Start-up Solar Panel Voltage (V)	180
Nominal Solar Input Panel Voltage (V)	620
Max. Input Current per MPPT (A)	12.5/22
Max. Short Circuit Current per MPPT (A)	15.2/27.6
Max. Backfeed Current to The Array (A)	0
Number of MPP Trackers	2
Number of Strings per MPPT	1/2
Nominal Apparent Power Output to Utility Grid (VA)	10,000
Max. Apparent Power Output to Utility Grid (VA)24	11,000
Nominal Apparent Power from Utility Grid (VA)	15,000
Max. Apparent Power from Utility Grid (VA)	15,000
Nominal Output Voltage (V)	400/380, 3L/N/PE
Output Voltage Range (V)	0~300
Nominal AC Grid Frequency (Hz)	50/60
AC Grid Frequency Range (Hz)	45~65
Max. AC Current Output to Utility Grid (A)	16.5
Max. AC Current From Utility Grid (A)	22.7
Max. Output Fault Current (Peak and Duration) (A)"	45@2μs
Inrush Current (Peak and Duration) (A)	45@2μs
Nominal Output Current (A)	14.5
Power Factor
Max. Total Harmonic Distortion	<3%
Maximum Output Overcurrent Protection (A)	45
Back-up Nominal Apparent Power (VA)	10,000
Max. Output Apparent Power (VA)*3	10,000 (16,500@60 sec)
Nominal Output Current (A)	14.5
Max. Output Current (A)	16.5
Max. Output Fault Current (Peak and Duration) (A)	45@2μs
Inrush Current (Peak and Duration) (A)	45@2μs
Maximum Output Overcurrent Protection (A)	45
Nominal Output Voltage (V)	400/380
Nominal Output Frequency (Hz)	50/60
Output THDv (@Linear Load)	<3%
Max. Efficiency	97.60%
European Efficiency	96.80%
Max. Battery to AC Efficiency	97.50%
MPPT Efficiency	99.90%
PV Insulation Resistance Detection	Integrated
Residual Current Monitoring	Integrated
PV Reverse Polarity Protection	Integrated
Anti-islanding Protection	Integrated
AC Overcurrent Protection	Integrated
AC Short Circuit Protection	Integrated
AC Overvoltage Protection	Integrated
DC Switch	Optional
DC Surge Protection	Type III
AC Surge Protection	Type III
Remote Shutdown	Integrated
Operating Temperature Range (℃)	-35~+60
Relative Humidity	0~95%
Max. Operating Altitude (m)	4000
Cooling Method
User Interface	LED, APP
Communication with BMS*6	RS485, CAN
Communication with Meter	RS485
Communication with Portal
Weight (kg)	25
Dimension (W×H×D mm)
Noise Emission (dB)	<30
Topology	Non- isolated
Self-consumption at Night (W) - no backup power	<15
Ingress Protection Rating	IP66
DC Connector