Secure Wireless Mesh RV Classic Hub

$438.90
In Stock


This is industrial grade hardware with the solid alluminium case having a heat-sink designed enclosure for high temperature use. Control over 200 devices, multi camera viewer dashboard, and camera hot zone motion detection.

Hub uses:

Z-Wave Plus Mesh Network for switching controls (pumps, circuits, slideouts) in RV.

Z-Wave Plus Mesh Network for LED lighting controls in RV,

Z-Wave Plus Mesh Network for IR control of Airconditioner in RV,

WiFi Network for Security IP Cameras,

WiFi Network for Multimedia (Roku plus others),

WiFi network for Battery Control (Lithium Battery),

WiFi network for Solar Controller Monitoring,

Bluetooth Control for LPG bottle level.

 

Heart of the reliability is the Z-Wave Plus Mesh Network.

Z-Wave is low-power, 2-way wireless technology designed and optimized specifically for the Internet of Things. Z-Wave is the only protocol dedicated to cross-brand product interoperability. Unlike competing protocols, every Z-Wave product always works with every other Z-Wave product, regardless of brand, and is backward-compatible between versions.

In addition to product interoperability, which is stringently certified, Z-Wave offers a myriad of advantages over other smart protocols. Z-Wave’s intelligent, scalable, mesh network topology easily provides reliable coverage. It's boosted by the fact that Z-Wave devices are also repeaters.  End-to-end S2 encryption makes Z-Wave smart homes virtually unhackable. Z-Wave’s industry-leading power management allows for sensors that can go for years without a battery change.

DOES NOT NEED INTERNET TO OPERATE

The system works all the time, even when your Internet service goes down. Of course, without the Internet you won't have remote access to your system. However, the system will continue to work. (If equipped with "cellular backup" capability, your system can also send out text and/or email notifications without Internet.)

SECURE

Z-Wave’s mandate of certified product interoperability at the application level is unique to IoT. Every Z-Wave  product always works with every other Z-Wave device or application throughout the brand-agnostic Z-Wave ecosystem.  Z-Wave is the enabling technology of choice for more than 375 global market leaders in virtually every industry touched by the IoT, including over 90% of the North American smart security market.

Z-Wave devices operate in the 900 MHz band defined by the ITU G.9959 standard. This feature makes Z-Wave devices impervious to interference from overcrowded 2.4 GHz networks occcupied by Wi-Fi, Bluetooth, other common technologies. Interference, whether inadvertent or intentional, is dangerous for smart homes. Hackers even deliberately use 2.4 GHz signal jamming to cause false alarms and security breaches. Z-Wave’s two-way sensors feature Jamming Detect, a mechanism that was created to satisfy UL’s stringent interference protection requirements.

Z-WAVE MESH NETWORK

The Z-Wave distributed intelligence mesh-networking technology enables the Z-Wave devices themselves to create a network with built-in repeater technology and secure communications among all nodes, which is critical for door locks and other security-sensitive devices. While Z-Wave signals easily travel through most walls, floors and ceilings, the devices can also intelligently route themselves around obstacles to attain seamless, robust, coverage.

Z-Wave’s devices can communicate point-to-point for up to 30m on their own, but with their ability to hop signals, effective ranges of up to 100m are easily achieved, and Z-Wave networks can be linked together for even larger deployments.

(AutomateRV-Hub-02)

iCPE

MODEL

Wireless

USB PORT

TPPORT

BACKUP BATTERY

Type

Speed (Mbps)

Connector

Port

Speed (Mbps)

Port

Type

Voltage

Capacity

iCPE

Z-Wave

480

Type A

3

10/100/1000

2

-

-

-

iBAT-5800

-

page2image466397728

-

-

-

-

-

Li-ON

3.7V

5800mAH

INDUSTRIAL GRADE

This is industrial grade hardware with the solid alluminium case having a heat-sink designed enclosure for high temperature use.

Control over 200 devices, multi camera viewer dashboard, and camera hot zone motion detection.

AUTONOMOUS

It doesn’t need access to external servers to work. The whole system is managed locally and you are therefore the only one to have access to it in order to guarantee complete security and confidentiality.

CUSTOMIZABLE

Thanks to it’s flexibility and numerous customisation settings, each RV manufacturer can create his own settings. Using widgets, views and designs, you have freedom to imagine your own interface if you wish.

VIEW FROM ANYWHERE

View and control your system from anywhere in the world (where there’s Internet.). Or enjoy local control in your RV, without any issues of latency, even when the Internet is down.

Geofencing—the system can know who is arriving/leaving based on cell phone location.

Receive notifications when RV batteries are low, or when anything else happens with your system.

OPEN SOURCE

The Jeedom software is open source; you have complete access to the software that manages your home automation. This is a guarantee of transparency, but also longevity of the software and your system

You can choose from over 200 apps from independent (third party) developers.

 

Power Requirement

Power Source: 12Vdc: 1W

Environmental Condition

Operation: 0°C~ 60°C
Storage: -20°C ~ 60°C
Humidity: 5% ~ 90%, Non-Condensing

Dimension

134W*126D*39H mm 

 

Weight

0.65Kg

SKU AutomateRV-Hub-02
Shipping Weight 0.5500kg
Shipping Width 0.200m
Shipping Height 0.150m
Shipping Length 0.300m
Shipping Cubic 0.009000m3


More From This Category