Remote Generator Monitoring

Increase the reliability of your generators and save thousands of dollars in down-time and service costs with our no-contract remote GPS-based monitoring solutions. SAFIERY wireless remote generator monitoring system allows you to monitor and diagnose the status of your generator from any location, anytime. Any subscription plan can be month to month. No contract required!

Our cost-effective remote generator monitoring technology works with ALL brands of standby generators and provides both alerts and location (for mobile plant), 24/7, for critical diagnostic condition.

Benefits of Remote Monitoring

• Maintain peak generator operation
• Early detection of generator failure
• Reduced generator downtime
• Remote start/stop capability
• Real-time generator alerts using your computer, tablet
• or smartphone
• Peace of mind

Most Common Alerts

• Generator Running (start/stop alerts)
• Failed Exercise
• Low Oil Pressure
• Low Fuel
• High Engine Temperature
• No Start Voltage (low or dead battery)
• Location Tracking (generator has been moved)

Combining two functions into the one OPERATOR SAFETY System and adding SMS alarm plus GPS position

1. Active Dual-Axis Slope Meter
2. Cabin Pressurisation (and temperature)
3. Remote notification of alarm plus GPS position

First System:

SIMARINE’s Active Dual-Axis Slope Meter provides highly visible and configurable pitch and roll measurement and display to operators of industrial machinery.

Both pitch and roll can simultaneously be displayed and can optionally be made to signal in the event of an alarm or warning condition. 

The integrated touch controls allows for customisation of the display; in application calibration; warning and alarm setup; minimum and maximum tilt display and sensor customisation.

Second System:

Cabin pressurisation monitor shows on the colour display the cabin pressure in Pascals.

The integrated touch controls allows for customisation of the display; in application calibration; warning and alarm setup; minimum and maximum pressure conditions for alarm customisation.

Both systems contained in:

Equipped with a 3.5" LCD TFT screen, high-resolution IPS technology with high brightness, optimal color reproduction, wide viewing angles and a virtually indestructible Gorilla glass with anti-reflection coating, the PICO is suitable for both indoor and outdoor installation. Thanks to special capacitive CapSense® touch buttons, you can easily operate your PICO even with wet fingers.

An optional industrial adjustable mount allows for optimum positioning for the operator.



Integrated alarm and warning relays provide normally open, normally closed and common outputs. Both warnings and alarms can be configured to be normally-on or normally-off.

Alarms and warnings can be configured and set for a particular machine.

All settings can be saved to a smartphone. 

Rugged Hardware

Display: LCD TFT 3,5” High resolution IPS, Gorilla Glass, anti-reflective coating
Human interface: 4 Touch buttons, water resistant
Enclosure: CNC-milled anodized aluminum, water- and dustproof
Dimensions: HxWxD 98 x 83 x 10 mm

An optional fully adjustable RAM 1" ball mount can be screw mounted to the vehicle, or suction mounts are available.


Features:
• High visibility colour display 
• Pitch & roll readouts 
• Clear full colour graphics display
• Warning and alarm outputs 
• Voltage range from 9-36V 
• Reverse polarity protected

Remote Alarm Notification