400V DC 230VAC 2500W Inverter Charger
Main Features
This technology eliminates all single points of failure with full scalability; up to 32 modules in parallel and high efficiency of up to 96% .
-
High efficiency (DC to AC >94.5%)
-
Compact design
-
Dual input sources (AC & DC) with wide AC input range 150 Vac to 265 Vac
-
Transfer time reduced to 0
-
Up to 12 kVA in redundant multiple Modules
|
General |
|
|
EMC |
EN 61000-4-2 / EN 61000-4-3 / EN 61000-4-4 / EN 61000-4-5 / EN 61000-4-6 / EN 61000-4-8 ETSI EN 300386 v1.9.1 |
|
Safety |
EN62040-1 |
|
Cooling |
Forced |
|
MTBF |
240 000 hrs (MIL-217IF) |
|
Efficiency (Typical): Enhanced power conversion / on line |
96% / >94.5% |
|
Dielectric strength DC/AC |
2100 Vdc |
|
RoHS |
Compliant |
|
Environment |
ETSI EN 300019 / ETSI EN 300132.2 |
|
Altitude above sea without de-rating of power |
< 1500 m / derating > 1500 m – 0.8 % per 100 m / max 4000 m |
|
Ambient temperature |
-20 to 40° C |
|
Storage temperature / relative humidity |
-40 to 70°C / 95%, non-condensing |
|
Material (casing) |
Zinc coated steel |
|
Power |
|
|
AC Output Power |
|
|
Nominal Output power (VA) / (W) |
3000 VA / 2500 W |
|
Short time overload capacity |
125% (15 seconds) |
|
Admissible load power factor |
Full power rating from 0 inductive to 0 capacitive |
|
DC Input Specifications |
|
|
DC voltage: Nominal / range |
372 Vdc / 200 - 430 Vdc* |
|
Nominal input current (at 372 Vdc nominal and 2500 W power) |
7.3 A |
|
Maximum input current (for 15 seconds) / voltage ripple |
9.2 A / < 250 mV RMS |
|
AC Input Specifications |
|
|
Nominal voltage (AC) |
230 Vac Line to Neutral |
|
Voltage range (AC) |
150 - 290 Vac permament (295 Vac 60 ms) |
|
Brownout |
2500 VA / 2500 W @190 Vac, 3000 VA / 2500 W from 230 to 277 Vac** |
|
Power factor @ Nominal Power |
> 99% |
|
Frequency range (selectable) / synchronization range |
50 Hz (range 47 – 53 Hz) / 60 Hz (range 57 – 63 Hz) |
|
AC Output Specifications |
|
|
Nominal voltage (AC**) |
230 Vac Line to Neutral |
|
Frequency / frequency accuracy |
50 or 60 Hz / 0.03% |
|
Total harmonic distortion (resistive load) |
< 3% |
|
Load impact recovery time (10% - 90%) |
<= 0.4 ms |
|
Nominal current |
13 A @ 230 Vac |
|
Crest factor at nominal power |
3 : 1 for load P.F. <= 0.7 |
|
Short circuit clear up capacity 0-20 ms |
100 A for 20 ms - Available while Mains is available at AC input port / 34 A RMS in DC/AC |
|
Short circuit current after >20 ms -15 s |
18 A RMS |
|
AC output voltage stability |
±1% from 10% to 100% load |
|
In Transfer Performance |
|
|
Max. voltage interruption / total transient voltage duration (max) |
0s / 0 s |
|
Signaling & Supervision |
|
|
Display |
Synoptic LED |
|
Alarms output / Supervision |
Dry contacts on shelf / Use optional devices |
|
Remote on / off |
On rear terminal of the shelf via T2S ETH |
* Derating between 200 to 260 VDC.
(DCD400242500)
| SKU | DCD400242500 |
